Elsema Eclipse MCS, Настройка и техническая информация

Страница: 10 / 32

Limit Switches
Controller with
limits connected
By default the limit switch inputs on the control card are normally closed (NC).
This can be changed to normally open (NO) during the setup steps.
Fuse
Close
Master
Control
Open Limit
Common
Close Limit
AC Supply : 24/12 Volts AC
Model : MCS
Designed by ELSEMA
IN AUSTRALIA
AC Supply AC Supply
Motor Motor
Normally Closed
User can change
M
Motor 1
Fuse
Close
Master
Control
AC Supply : 24/12 Volts AC
Model : MCS
Designed by ELSEMA
IN AUSTRALIA
AC Supply AC Supply
Motor Motor
M
Close
Limit
Open
Limit
Diode* Diode*
* 6 Amps, 50V or better diode
Elsema : Diode FR604
Controller with limits
in series with motor
If you are using limit switches make sure they are connected properly. The control card can operate
with either the limit switches connected directly to the cards terminal blocks or in series with the
motor. See the diagrams below:
10 Gate & Door Controller with Eclipse
®
Operating System (EOS)