background image

Index

Features ..............................................................4

Description..........................................................4

Part Number ........................................................5

Menu Structure ............................................... 6-7

Connection Diagram ...........................................8

Setup Instructions ...............................................9

Limit Switches...................................................10

Setup i-Learning Steps......................................11
Menu 1 – Auto Close ........................................12

- Normal Auto Close

 ...................................12

- Auto Close with Photoelectric Trigger

 ......12

- Auto Close after an Open Obstruction

 ......12

-  Auto Close after Power Restored.

..............13

-  Normal Auto Close on  

Sequential Obstructions

 ...........................13

-  Auto Close Only when  

Fully Opened

 ............................................13

- Auto Close Only at Night

 ..........................13

Menu 2 – Pedestrian Access Features ........ 13-14

Menu 3 – Input Functions .................................14

Menu 4 – Photoelectric Beam ...........................15

Menu 5 – Relay Output Functions .....................16

-  Lock/Brake Output

 ....................................17

- Courtesy Light

 ..........................................17

- Service Call Output

 ..................................18

- Strobe or Warning Light

 ...........................18

Menu 6.1 – Lock/Brake Output Modes..............19

-  Open Lock/Brake Activation

 .....................19

-  Close Lock/Brake Activation

 .....................19

-  Open Pre-Lock/Brake Activation

 ...............19

-  Close Pre-Lock/Brake Activation

 ..............19

Menu 6.2 – Courtesy Light Output Mode ..........20

Menu 6.3 –  Strobe (Warning) 

Light Output Mode .........................20

-  Pre-Open Strobe Light Activation

 .............20

-  Pre-Close Strobe Light Activation

 ............20

Menu 6.4 – Service Call Output Mode ..............21

Menu 7 – Special Features................................22

-  Remote Control Open Only

 .......................22

-  Holiday Mode

 ...........................................22

-  Energy Saving Mode

 ................................22

-  Automatic Stop / Open on Closing

 ...........23

Receiver Channel 2 Options

 .....................23

Press and Hold on Open & Close Inputs

 ..23

Window and Louvre Mode

 .......................23

Menu 8 – Leaf Delay .........................................23

-  Open Leaf Delay

 .......................................23

- Close Leaf Delay

 ......................................23 

- Close Leaf Delay on Mid Open

 .................23

Menu 9 –  Motor 1 Obstruction  

Detect Margins..................................24

-  Margin Example

 .......................................24

Menu 10 –  Motor 2 Obstruction  

Detect Margins................................25

-  Margin Example

 .......................................25

Menu 11 –  Motor Speed, Slow Speed 

Area and Reverse Time ....................26

-  Open and Close Speed

 .............................26

-  Slow Speed

 ..............................................26

-  Slow Speed Area

 ......................................26

-  Obstruction Stop Reverse Delay Time

 ......26

Menu 12 –  Anti-Jam, Electronic Braking and 

Open/Close Obstruction Operation .27

Menu 13 – i-Learning .......................................28

Menu 14 –  Password ........................................28

Menu 15 –  Operational Records........................28

-  Event History ............................................

28

-  Displays Gates/Doors Operations 

and Current Levels

 ...................................28

Menu 16 –  Tools ...............................................29

-  Number of Motors

 ....................................29

-  Set the Supply Voltage

 .............................29

Resets Controller & Test Inputs

 ................29

Travel Timer for Slip Clutch Motors

..........29

Solar Mode and Fuse Type

 .......................29 

Day and Night Sensitivity Adjustment

 ......29 

Slow Speed Ramp Down Time

 .................29

Accessories .......................................................30

- Battery Charger and Solar Applications

 ....30

- Backup Batteries

 .......................................30

- Keyring Remotes & Photoelectric Beams

 .31

- Strobe Lights

 ............................................31

3

www.elsema.com

Содержание Eclipse MC

































Отзывы: