ELSA AirLancer MC-11, Руководство пользователя

Страница: 42 / 60

Example configurations
|
|
AirLancer
|
42
EN
Setting up the
wireless network
cards To enable the wireless network cards to detect one another and exchange
data with one another, the various parameters must have the same values.
Open the configuration for AirLancer MC-11 with Start Programs
AirLancer PC Card Settings .
Different profiles can be set up in the dialog window. For the 'Default' profile
change the entry 'Access Point' to 'Peer-to-Peer Group'. Then click
Edit
Profile to set the network name.
Setting the network name
This setting is always required. Enter the name of the network in the 'Basic'
tab. This name must be the same for all PCs in the wireless network.
The question mark has the answer! If you have
questions about a specific setting, first try clicking on
this symbol and then on the area that you wish to
know more about.
Operating system
settings After installing and setting up the drivers for AirLancer PCI-11 and
AirLancer MC-11 in all computers, some components in the operating
system—using Windows 98 as an example—still need to be set up.
Network protocol
The network protocols TCP/IP and NetBEUI are required to implement a
peer-to-peer network with the wireless network cards. Install the
protocols if they are not already installed and check the protocol links to
the
AirLancer MC-11 wireless network card in the control panel.
Client
The Windows network client is required to permit all of the workstations
in the Windows network to log on with names and passwords.
Service
File and printer sharing permits drives and printers to be shared with
other users in the Windows network.
Name and group designation
Click Start Settings Control Panel Network and switch to the
'Identification' tab.