ELSA AirLancer MC-11, Руководство пользователя, Страница: 17 / 60

|
AirLancer MC-11
17
|
AirLancer
|
EN
Secure power supply
If during the installation, the firmware of your AirLancer MC-11
turns out not to be up to date, the setup program will suggest to you the
automatic updating of the firmware. This action needs your confirmation.
Please ensure before beginning with the updating of the firmware that a
stabile power supply is guaranteed during the installation. Avoid carrying
out the installation on a notebook running on its battery. Please also
ensure that your computer does not shut down or go into standby during
the updating process. Close all applications before starting.
Additional system requirements for Windows NT 4.0
For the installation under Windows NT 4.0 please ensure that the
required system resources are available before placing the card into your
computer. The procedure is as follows:
The AirLancer MC-11 will be installed with IRQ 10 and the address
range '400–437' by default. The interrupts and addresses can be viewed
under
Start Programs Administrative Tools (Common)
Windows NT Diagnostics .
If the required resources are not available, please make a note of other
free resources and specify them during the installation. It is also possible
to change the resource allocations at a later time with
Start Settings
Control Panel Network Adapters Properties .
Additional system requirements for Windows CE
The drivers for Windows CE require a firmware status of 6.06 or higher
for
AirLancer MC-11 . Older cards may require updating of the
firmware. This updating takes place automatically if you first install the
card in a computer under Windows 98, Windows 95, Windows Me or
Windows 2000.
2.3.2 Inserting the card in the computer
Insert the card into a free PC card slot of your enabled computer. Please
ensure that the side with the product name faces up, while the side with the
serial number faces downwards.