105U-G Wireless Gateway
User Manual
Page
33
©
August 2003
When you have selected the project, a screen will appear where you may enter the system
address.
If you are editing an existing
project, the system address will
already have been entered. Do
not change the system address
unless you are going to re-
program all of the modules in
the system.
Password
. You have the
option of entering a password to
protect the configuration files
against unauthorized changes.
When you open a new project,
you will be asked to enter a
password - if you do not enter
any text - that is, press “ESC”
or “Enter”, then password
protection is disabled. If you
do enter a password, then you
will need to enter this password
to access the project. Without
the password, you are unable
access the project
The password can be between 6
and 256 characters. You can
also change password at any
time by over-typing the passowrd.
If you are starting a new project, you have the option of “Enabling Security”. This option
enables encryption of the data sent over the radio. - please read Section 4.2.2 and the
associated warnings before using this option.
To proceed with the
configuration,
double-click on the
project name on the
menu on the left side
of the screen.
“Units” will appear.
You can now enter
the types of units
which will be used
in the system. If you
double-click on
“Units”or select the
“+” sign beside
“Units”, then the
modules that have
already been created will be displayed.
