ELNA expressive 940, Инструкция по эксплуатации

Страница: 59 / 87

55
4/8
88x90mm
21 min
1 / 5 Color
1 / 8544 ST
1 Ivory White 253
2 Bamboo 224
3
Tangerine 274
1
2
3
4 Orange 203
1 Sienna 256
4
5
Trace outline
4/8
88x90mm
21 min
1 / 5 Color
1 / 8544 ST
1 Ivory White 253
2 Bamboo 224
3 Tangerine 274
1
2
3
4 Orange 203
1 Sienna 256
4
5
Starting to Embroider
z Select the pattern you wish to sew. The LCD
touch panel shows the Ready to sew window.
NOTE:
The embroidery result may vary depending on the
fabric and threads used. Make a test embroidery
using the same fabric and threads before sewing on
the actual garment.
Adjust the hoop position by pressing the jog
buttons if necessary.
q
Jog buttons
x
To check the needle drop position, lower the
needle bar with the small screwdriver so you can
see the needle point closer to the fabric.
Push down the needle bar using the
screwdriver as illustrated.
The needle bar can be lowered by turning the
handwheel clockwise.
CAUTION:
Make sure to bring the needle bar and presser foot to
the up position by pressing the auto thread cutter
button before pressing the trace button or turning the
machine off.
c
Press the trace button to check the size and
position of the selected pattern against the hoop.
w Trace button
NOTE:
Check if the fabric edge will not obstruct the
movement of the hoop.
q
w
z
x
c