To Sew:
Use this foot in the same way as the standard zigzag
foot.
To Insert the Bobbin:
1. Place a bobbin in the bobbin holder with the thread
running off counterclockwise as shown.
End of thread
Bobbin
2. Hold the bobbin with a fingertip so it does not
rotate. Guide the thread into the front notch of the
bobbin holder. Pull the thread to the left to pass it
under the guide.
Front notch
Guide
3. Draw the thread to the left to pass it into the guide
path marked «1». Make sure that the thread comes
out from the side notch of the bobbin holder.
Guide path «1»
Side notch
4. Continue to draw the thread along the guide path
marked «2» and pull the thread to the right through
the slit. The thread will be cut to a proper lenght
and held in place.
Guide path «2»
Slit (Thread cutter)
• Do not move the feed dog with the foot lowered
without fabric. Otherwise, the feed dog will be
damaged.
• Do not scratch the needle plate with a sharp item
such as a needle, scissors, etc. Otherwise, the
needle plate will be damaged.
