STINGER – Owner’s Manual – Ver: 2.31
8
Elmwood Amps
TOGGLE SWITCHES AND HI CUT KNOB
Toggle switches
Switch marked Modern / Vintage
Modern - The amp puts out approximately 30 watts. This mode gives the
amp a fast and articulated response.
Vintage - The output power reduces to approximately 18 watts. This mode
gives the amp a darker sound and allows for power amp
compression/distortion at lower levels.
Switch marked Ch Select
Position 1 – Activates Channel 1.
Position 2 – Activates Channel 2.
Switch marked Bright Ch1
Affects Channel 1.
Middle position – Bright is off.
Position 1 – Smaller increase of Brightness
Position 2 – Bigger increase of Brightness.
Switch marked Bright Ch2
Affects Channel 2.
Middle position – Bright is off.
Position 1 – Smaller increase of Brightness
Position 2 – Bigger increase of Brightness.
High Cut Knob
The high cut is global and affects both channels.
The more the High cut is being turned up, clockwise, the more it will cut off the high
frequencies of the amp.
Note:
When connected, the foot switch overrides the Ch Select.
