STINGER – Owner’s Manual – Ver: 2.31
3
Elmwood Amps
WELCOME
Congratulations
to your purchase of a Elmwood STINGER.
The STINGER is a 30 watt cathode biased EL84 equipped amplifier with separate
Gain and Volume for the 2 channels.
Among many smart features the power amp can be switched between Modern style
and Vintage style and the FX loop can be altered as a solo booster. The traditional
EQ puts you right in control. Equipped also with a three position bright switch and a
Hi cut knob.
The Stinger is capable of producing everything from big warm clean sounds and
funky clean rhythm to raw crunch and singing lead tones with its own touch.
Features
•
The STINGER is a 2 channel, all tube amplifier
•
Each channel has its own Gain and Volume controls as well as a three position
bright switch.
•
The two channels are footswitch able.
•
The EQ section contains Treble, Middle, Bass and High cut.
•
There are two different output power modes; Modern and Vintage.
Modern is full output, 30 watts
Vintage lowers the output to approximately 18 watts and gives the
amplifier a somewhat darker voicing and a smoother feel.
•
Serial FX loop with an adjustable send level that also can act as a volume
booster using the footswitch’s on/off feature.
•
The amplifier chassis is built as a 2 unit high, rack mountable unit and is fan
cooled.
•
There are five different speaker outputs on the back of the amp, from 4 to 16
ohms, to match any speaker load.
•
The speaker, in the 1X12” combo version, is a lightweight Jensen Neo.