STINGER – Owner’s Manual – Ver: 2.31
7
Elmwood Amps
CHANNEL 1 & 2
Channel 1
•
Press the switches on the foot switch so that the led’s will go dark to activate
Channel 1 and the FX loop deactivated.
•
Turn up Gain 1 on Channel 1 to its middle position.
•
Slowly turn Volume 1 up.
You should now be able to hear sound coming out of the speaker(s).
By adjusting Volume, Gain, Treble, Mid, Bass and bright switches you can change
the sound and vary from clean to distortion. The EQ section is very effective and you
will not have any problem finding your favourite sounds.
For cleaner sounds it’s recommended to keep the Gain 1 below 12 o’clock and adjust
the overall output with Volume 1.
Channel 2
•
Press the left switch on the foot switch so that the channel LED lights up to
activate Channel 2.
•
Turn up Gain 2 on Channel 2 to its middle position.
•
Slowly turn Volume 2 up.
You should now be able to hear sound coming out of the speaker(s).
Channel 2 is a dedicated crunch/lead channel with the ability to clean up according to
the guitars volume control.
For lighter crunch rhythm and lead sounds - keep the Gain 2 below 12 o’clock and
adjust the overall output with Volume 2.
For lead and heavier rhythm parts - adjust Gain 2 to a suitable level above 12 o’clock
and adjust the overall output with Volume 2.
