STINGER – Owner’s Manual – Ver: 2.31
4
Elmwood Amps
PRECAUTIONS & WARNINGS
PRECAUTIONS & WARNINGS
Always follow the safety instructions listed here and use common sense.
•
Read this manual carefully before switching on your amplifier.
•
Do not try to open the amplifier chassis – there are no serviceable parts.
•
Vacuum tube amplifiers generate heat. Insure proper ventilation.
Keep away from curtains or any flammable objects.
•
Tubes may be extremely hot after the amplifier has been on. Never touch a hot tube.
•
Do not expose the amplifier to rain, moisture, or any kind of water or liquids. Never
use the amplifier in wet condition.
•
Do not block ventilation openings on the rear of the amplifier.
•
Never operate the amplifier without a connected speaker or load
since this can cause severe damage to the amplifier.
•
Always insure that amplifier is properly grounded.
•
Always unplug power cord before changing fuses or any tubes. When replacing fuse,
use only same type and rating. Avoid direct contact with heated tubes.
•
Keep children away from the amplifier.
•
Be sure to always connect an AC power supply that corresponds to the amplifiers
power supply specification / setup.
•
Always turn off the power of all related equipment before making any connections.
•
Make sure that you are using a correct speaker cable for the speaker outputs. Low
signal cables, such as regular guitar cables, might seriously damage the output stage
of the amplifier.
•
Always remove power plug from the wall socket if there is any risk of lightning
occurring nearby or if the amplifier is not used for longer periods.
•
Always treat your amplifier with caution and never use excessive force.
•
Never use solvents for cleaning. Wipe of the exterior with a soft cloth.
•
Your amplifier can create high sound volumes. Do not exposure yourself or others to
high sound volumes that may cause permanent hearing damage.
