STINGER – Owner’s Manual – Ver: 2.31
11
Elmwood Amps
BACK PANEL
Footswitch jack sockets
Close to the mains inlet on the back of the amp is the footswitch jack socket.
Here you connect the accompanying footswitch.
The jack socket can also be operated through a Midi switcher that has a closing relay
function.
•
The tip is channel switching
•
The ring is FX loop on/off
•
The sleeve is ground for both functions.
Mains input
Always connect the mains to an earthed outlet with a 3 pole CE approved mains
cord.
Fuses
Replace broken fuse only with the same type-Voltage/current.
The mains inlet fuse is a 250 Volt, 1 Ampere slow blow.
