25
www.gd-elmorietschle.com
© Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH
|
Maintenance and repair
7.3 Repair / Service
DANGER
Danger to life from touching live parts!
Touching live parts cause serious injuries or death.
Ø
Before starting any repair work, disconnect the machine by actuation of the main
switch or disconnection of the plug and secure it against unexpected restart.
Ø
Repair works are only allowed to be done by authorised specialists.
For on site repair work the motor must be disconnected from the mains by a qualified electrician so that it
cannot be started up again accidentally. For repairs use the manufacturer, its branch offices or authorised
dealers. Please contact the manufacturer for the address of the service centre responsible for you (see Man-
ufacturer‘s address).
WARNING
Risk of injury due to substances hazardous to health!
Due to contamination with hazardous substances and supplies during in the course of
operation there is a high health risk for the repair personnel.
Ø
For each machine that is sent to an Elmo Rietschle Service centre for inspection,
maintenance or repair, a fully completed, signed declaration of harmlessness must
be enclosed.
The declaration of harmlessness is part of the supplier's documentation.
Ø
Before returning, properly clean the machine.
After a repair or re-commissioning, the actions listed in chapter 5 „Installation“ and chapter 6 „Commission-
ing and decommissioning“ are to be performed as in the first commissioning.
Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch
Tel. 071 918 60 60, Mail: [email protected]
