ELMETRON CC- 411, Руководство пользователя, Страница: 33 / 52

- 27 -
11.1. Salinity measurement with conversion to NaCl
The measurement of salinity with conversion to NaCl or KCl content should
be done as follows:
-
choose the salinity measurement with conversion to NaCl content
according to the chapter 6.1;
-
then act as during conductivity measurement (chapter 10);
-
read the result after it has stabilised.
Caution: next to the reading the unit symbol on turn with the symbol
displays.
11.2. Salinity measurement with conversion to TDS
The meter enables simplified way of determining the Total Dissolved Solids
(TDS) content. For calculations the constant coefficient is used (W
TDS
= 0.5).
The measurement of salinity with conversion to TDS should be done as
follows :
-- choose the measurement of salinity with conversion to TDS according to
the subchapter 6.1;
- act as during the conductivity measurement (chapter 10).
-
after it has stabilised, read the result in g/l.
Caution: next to the reading the unit symbol on turn with the symbol
displays.