background image

12

MAINTENANCE AND CLEANING

STORAGE OF THE PORTABLE VERSION 

Cleaning 

The charging station and the power cords should be cleaned regularly. The 

cleaning process can be done using a wet rag.

Do not use water jet, high pressure washer, chemicals agents or 
solvents during the cleaning process. Do not splash water on the 
power cords or on the plugs/connectors.

Maintenance 

This charging station does not require any major maintenance except a 

regular verification to be sure that there are no damages or excessive wear 

to the charging station itself or to any of the power cords/plugs/connectors. 

The portable version of the charging station (models 5 and 31) must be 

stored in a clean and dry location, and it must be located away from any 

high heat sources. 
Avoid oily or corrosive substances from contacting the charging station or 

the power cords and plugs/connectors between uses. 
Avoid any fall or drop that can lead to impacts between a hard surface and 

the charging station. Make sure there is no contact of any sharp object with 

the charging station or the power cords or plugs/connectors.  
Do not store the charging station in a location where rodents have access, 

such as an exterior shed. 

Содержание EVC30T

















Отзывы: