This document contains important safety and operating instructions for the ProMaster 2-Hour World
Charger Kit. Please read and follow all instructions before using this product.
IMPORTANT WARNING:
This device is for charging rechargeable
AA or AAA NiMH
batteries
ONLY
. Inserting any other batteries
may damage the device, destroy the batteries and cause injury to the user. For best results, always use
PROMASTER XtraPower batteries.
CAUTION:
*
Always unplug the charger when the charger is not in use.
*
Always unplug the charger from the power source before cleaning the charger.
* Always replace frayed or damaged wire and broken plugs immediately.
* Do not use, place or store the charger where it may come into contact with water or moisture.
*
Do not short-circuit the metal contacts of the battery and charger.
* Do not disassemble, deform or reconstruct any part of the charger.
OPERATING INSTRUCTIONS:
1. Simply plug this charger into a household AC outlet. The LED indicator light will flash RED, then turn
GREEN to indicate that it is ready for use.
2. When inserting batteries into the charger, refer to the embossed diagram inside each battery slot. Insert
the batteries into the charger with the correct direction of polarity. To protect the user and batteries, the
charger will NOT charge the batteries if they are placed into the charger with reversed polarity.
3. There are two separate charging channels built into this fast
charger. Each channel will quick-charge two NiMH AA or AAA
batteries.
4. The 2-color LED above the letter “A” is the charging indicator
for the pair of AA/AAA batteries on the left. The 2-color LED
above the letter “B” is the charging indicator for the pair of
AA/AAA batteries on the right. (
See
Fig.1)
5.
When
two batteries are inserted into a charging channel, the
LED will appear RED and charging will begin. As soon as the
batteries are fully charged, the LED indicator will turn GREEN.
6. If the LED indicator turns RED and flashes, the batteries may
be short-circuited or faulty. Remove the batteries and insert
them into the charging slot again. If the LED still flashes RED,
the batteries should be replaced.
7. After the batteries are fully charged, the charger will
automatically switch to trickle charge mode to protect your
batteries from over-charging and to maintain the batteries at
maximum capacity for use at any time.
8. The two charging channels in this charger can work independently or together, resulting in eight different
battery charging configurations.
(See Fig. 2)
9. For best results, make sure the pair of batteries to be charged in this charger are of the same brand and
capacity rating, and are placed together in the same charging channel.
10. This battery charger is also designed to function as a BATTERY TESTER for rechargeable NiMH AA or
AAA batteries.
Fig. 2
Fig. 1
