Technical Support: +31(0)20 6131611
PAK200582_01E August 2014
©2014 ELMDENE INTERNATIONAL LTD
Mounting – C Box – 7 Ah
5)
The C box is designed to support two 7 Ah or 2.1 Ah batteries and as such weighs a total of 8 Kg when
loaded. Ensure that wall fixings are appropriate to support this weight.
Mounting – E box – 17 Ah
6)
The E box is designed to support two support two 17 Ah batteries, and as such weighs 15 Kg when loaded.
Ensure that wall fixings are appropriate to support this weight.
7)
The product should be mounted no further than 10 cm from the control and indicating equipment, close
coupled by conduit if it is being used to power the CIE directly.
8)
Fix to wall or other structure in correct orientation i.e. with hinge on left hand side, using screws of
sufficient size and length through the mounting holes.
9)
Protect the battery terminals from any metal surfaces during installation as shorting of the terminals is
hazardous.
10)
Knock-outs are provided in the case for mating with external trunking or conduit.
11)
Ensure that all unused holes (on the rear of the case) are sealed to prevent the ingress of damp and dust.
Figure 1 Mounting points
Mounting
points
Figure 2 Battery placement
- “E” Enclosure
“C” Enclosure
Fit 2 x 12V
7 Ah batteries
Fit 2 x 12V
17 Ah batteries
WARNING: ALWAYS FIT 2 BATTERIES and wire in series,
the product will not work with a single 12 V battery
www.acornfiresecurity.com
www.acornfiresecurity.com
