First start-up
© Elma Schmidbauer GmbH
BA_Elmasteam 4
5
_EN_Vers. 01.2019
17
4.3
Mounting of the wall bracket (option)
Walls made of concrete, natural stone, dense structure, solid
calcium silicate (lime sand) and solid plasterboard are suitable for
attachment of the wall bracket.
Ensure there is a stable base.
The following parts are supplied for the mounting of the wall
bracket:
(A) 2
Art. No. 1058680
Plug
(B) 2
Art. No. 1058678
Suspension fitting
(C) 2
Art. No. 1066448
Screw
(D) 2
Art. No. 1063024
Spacer
1. Drill
2 holes Ø 8 mm 90 mm apart and minimum 50 mm depth.
2. Press the plugs (
A
) as far as they will go into the holes.
3. Put the suspension fittings (
B
) on the screws (
C
) and align the
heads of the suspension fittings (
B
) upwards with the slots.
4. Turn the screws (
C
) into the plugs until only the suspension
fittings (
B
) are still visible.
5. Attach the 2 spacers (
D
) to the rear side of the machine.
6. Attach the machine using the openings on the rear side (
E
) in
the installed suspension fittings.
Wall bracket
fastening material
Procedure
