First start-up
18
BA_Elmasteam 4
5
_EN_Vers. 01.2019
© Elma Schmidbauer GmbH
Fig. 4.3. View with plugs in the mounted state
The manufacturer shall not accept any liability in the event of
injuries to persons or damage to the machine that has been
caused by incorrect mounting or defective quality of the
attachment wall.
4.4
Permanent water connection Elmasteam 4
5
basic P-HP
Ensure that the Elmasteam steam cleaner is switched off.
The minimum water pressure of 1.6 bar must not be undercut. The
maximum water pressure of 6 bar must not be exceeded.
Components in the machine can be damaged.
Use the supplied water hose. If required, an extension hose (2 m)
can be ordered as optional accessory (106 5691).
1. Put the flat seals included in the delivery
(
Fig. 4.4.1.A
) into the screw thread (
Fig. 4.4.1 B and C
).
2. Screw the connector (
Fig. 4.4.1.B
) of the water hose to the
water hose connection of the Elmasteam (
Fig. 4.4.2.D |
4.4.3.F
)
3. Connect the water hose to the water line (
Fig. 4.4.3.E.
).
Pay attention to correct and secure fastening of the water
hose.
Exclusion of liability
Mounting procedure
B
A
E
D
D
