ELKOR WattsOn-MCM Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 41

ELKOR WattsOn-MCM Скачать руководство пользователя страница 5

ELKOR TECHNOLOGIES INC.

- Page 5 -

MCM

–

USER MANUAL

1.

INTRODUCTION

1.1.

Documentation

This document was last revised in December 2020 (rev. 2).

Revision History

March 2020

Rev. 1

Initial revision

December 2020

Rev. 2

Corrected 2.6 to refer to "upper"/"lower" ports instead of "left"/"right"; added Appendix B

1.2.

Disclosure

This publication contains information proprietary to Elkor Technologies Inc. No part of this publication may be reproduced,
in any form, without prior written consent from Elkor Technologies Inc.

1.3.

Product Description

The WattsOn-MCM is a modular, internet-accessible metering solution for up to 60 independent circuits. It houses
between one and twenty metering "nodes", which measure three independent circuits each. The device measures Volts,
Amps, Real Power, Voltage Angle, Power Factor and Frequency, and Watt-Hours. These parameters can be read per-
channel, or aggregated into user-defined groups.

The WattsOn-MCM may be purchased with as few or as many nodes as needed, and additional cards can be added at a
later date if additional circuits are needed. Nodes are "hot-pluggable", meaning they can be added or removed without

powering off the device, ensuring metering is not interrupted.

It provides a dynamic AJAX-enabled web-interface to configure the device and to display readings, and can also send its
data to a web server via HTTP POST at regular intervals, using a highly configurable template-based format. The

WattsOn-MCM will store a backlog of data in the event of short, temporary network outages to ensure any post
information is not lost.

The unit accepts up to 600V (line-to-line) directly without needing potential transformers. It may be configured for use
with 333mV output CTs or

mA output CTs (such as Elkor’s "safe" mA split and solid core CTs)

.

The WattsOn-MCM supports DHCP. A Windows® utility is used to detect and configure the network parameters from a
Windows PC. In addition, the web interface allows for full device configuration.

For developers, custom web pages may be uploaded onto the device to create custom, highly integrated user interfaces.

1.4.

Features

The following bullet points summarize the WattsOn-MCM

’

s features:

•

Metering for 3 to 60 independent circuits.

•

Expandable after installation

•

Uninterrupted metering: circuits can be added while powered

•

Serial, Ethernet, or Wi-Fi communication

•

Real-Time monitoring via web interface

•

Highly customizable data posting via HTTP

•

Communication via Modbus TCP and Modbus RTU

•

Support for HTTP and HTTPS/SSL web posting

•

Support for DHCP and static IP addresses

•

Upgradable firmware

«
...
3
4
5
6
7
...
»

Содержание WattsOn-MCM










































Отзывы:

Нет отзывов