7
6
W W W. I N E L S . C O M / K I T S
U S E R ´S M A N U A L 2 . 0
HOW DOES IT WORK?
2
3
Each wireless unit is numbered 1,2,3, it corresponds to the name in Wireless
touch unit (Heating 1, Heating 2, Heating 3). It is possible to connect up to 30
Wireless thermovalves.
Wireless thermovalve measures the room temperature and based on the value set in
wireless touch unit it sends a command to open/close a thermovalve.
THE RANGE OF RF SIGNAL
brick
walls
wooden structures
with plaster boards
reinforced
concrete
metal
partitions
common
glass
60 - 90 %
80 - 95 %
20 - 60 %
0 - 10 %
80 - 90 %
common
metal
INSTALLING A WIRELESS TOUCH UNIT
In case of insufficient connection between wireless thermovalve, you have the following
possibilities:
RELOCATE WIRELESS THERMOVALVES
USE REPEATER
(plug-in signal repeater) - install between wireless touch unit and wireless
thermovalve which is out of the range.
Place a wireless touch unit in the best possible position from Wireless thermovalves.
Optimal placement of Wireless touch unit is in the middle of space between each wireless
thermovalve.
Please keep in mind, that the number of walls, ceilings reduces the signal strength and thus
limitsthe range of wireless thermovalves.
Temperature °C
Command
OPEN / CLOSE
°C
C
1
WIRELESS TOUCH UNIT
RF TOUCH
Heating 1
Heating 2
Heating 3
The range of RF signal is up to
200 m
in the free open air.
TRANSMISSION OF RADIOFREQUENCY SIGNALS IN VARIOUS MATERIALS
REPEATER
to extend
the range
Or
der
code
:
45
10
FE
Temperature regulation