PAGE 8
LJNED10_2AQ
1000002311 (Rev. D - 05/16)
TROUBLE SHOOTING AND MAINTENANCE
Orifice Assy:
Mineral deposits on orifice can cause water flow to spurt or not regulate. Mineral deposits may be removed
from the orifice with a small round file not over 1/8” diameter or small diameter wire.
CAUTION: DO NOT
file or cut orifice
material.
Stream Regulator:
If orifice is clean, regulate flow as in instructions. If replacement is necessary, see parts list for correct
regulator part number.
Actuation of Quick Connect Water Fittings:
Cooler is provided with lead-free connectors which utilize an o-ring water seal.
To remove tubing from the fitting, relieve water pressure, push in on the gray collar while pulling on the tubing. (See Fig.1) To
insert tubing, push tube straight into fitting until it reaches a positive stop, approximately 3/4”.
16
9
17
21
27
14
1
29
33
32 31
23
FIG. 15
FIG. 16
FIG. 17
FIG. 14
18
26
10 31
BASIN
3
31
SEE FIG. 14
SEE FIG. 2
8, 15, 28
SEE FIG. 16
5
SEE FIG. 13
35 20 26
BASIN
11
12
7
25
24
4
24
FIG. 13
