Elkay ezH2O LBWD06BKK Скачать руководство пользователя страница 5

(630) 574-8484 

Elkay Manufacturing Company 

Installation Manual (1000005232 Rev. D - 08/21) 

 

In-Wall Filtered Water Dispenser

2. Safety

 

 

THINK

SAFETY!

Think Safety

Before performing any work, read and 

understand the safety instructions in 

this manual. 

2.1  General

The Elkay Manufacturing Company (Elkay) cannot 

anticipate every possible circumstance that might involve 

a potential hazard during the installation or maintenance 

of this product. The warnings and instructions in this 

Installation Manual are, therefore, not all-inclusive. If a 

tool, installation procedure, or work method that is not 

specifically recommended by Elkay is used, you must be 

satisfied that it is safe for yourself and others. You should 

also make sure that the product will not be damaged by 

the methods you choose.  

Most work-related accidents are caused by failure to 

observe basic safety rules or precautions.  An accident 

can often be avoided by recognizing potentially 

hazardous situations before an accident occurs. As you 

install and maintain this product, you must be alert to 

potential hazards. You should also have the necessary 

training, skills, and tools to perform any installation or 

maintenance procedure.

2.2  Safety Alert Symbol

This is the safety alert symbol. It is used to 

alert you to potential personal injury hazards. 

Obey all safety messages that follow this 

symbol to avoid possible injury or death.

This manual contains WARNINGS, CAUTIONS, 

NOTICES, SAFETY INSTRUCTIONS, and NOTES which 

must be followed to prevent the possibility of improper 

service, damage to the equipment, personal injury, or 

death. The following keywords call the reader’s attention 

to potential hazards.

Hazards are identified by the “Safety Alert Symbol” 

and followed by a signal word such as “WARNING” or 

“CAUTION”.

2.3  Personal Safety

DANGER

•  Please read these instructions completely 

before starting the installation or performing any 

service. Failure to follow the instructions and 

safety precautions in this manual can result in 

serious injury or death.

•  After installation, keep these instructions in a 

safe location for future reference.

•  Electric supply must be identical in voltage, 

cycle, and phase to that specified on nameplate.

•  Electrical supply must have Ground Fault Circuit 

Interrupter (GFCI) protection.

•  A means for disconnecting electrical supply to 

the unit must be incorporated in the fixed wiring 

in accordance with wiring rules. This is to allow 

electrical disconnection of the unit from electrical 

supply after installation.

WARNING

These warnings indicate a potentially hazardous 

situation which, if not avoided, could result in serious 

injury or death. Follow all instructions related to the 

installation and/or maintenance of this product (unit).

For use with clean, clear potable drinking water only. 

Do not use with water that is microbiologically unsafe 

or of unknown quality without adequate disinfection 

before the system.

Installation and connection to water and electrical 

mains must be in compliance with local and national 

laws.

All Installation and Service work must be performed 

by an authorized service personnel.

Personal Protection

   

Be sure to use all personal protective 

equipment, such as sturdy safety glasses, 

work shoes, hearing protection, and cut resistant 

gloves, whenever necessary, to ensure your own 

safety.  

To avoid eye injury, always wear protective 

glasses with side shields when using 

power tools. Also, make sure no one else 

can be injured by flying particles when using 

power tools. 

Always wear ear protection, such as 

earmuffs or earplugs, when using power 

tools.

 Wear protective cut resistant gloves 

during installation to protect against 

sharp edges from sheet metal 

components.

Power Tool Hazard

   

To prevent personal injury or possible death, 

always follow the electrical safety 

recommendations of the power tool’s manufacturer. 

Содержание ezH2O LBWD06BKK




















Отзывы: