+358 40 685 1590 | [email protected] | www.elixair.fi
5.
DEPLOYMENT OF ELIXAIR DUCT FILTER
Check the following before connecting the unit to the mains:
•
When switched on, the duct filter must be at room temperature. If the
unit is brought inside from a cold place, the temperature inside the unit
must be allowed to even out before use.
•
Open the service door. Remove the plastic cover around the active
carbon filter.
•
Insert the filter and close the service door.
•
Connect the duct filter unit to a grounded 230V/50Hz wall socket.
•
Operate the 2-way switch to turn on the duct filter unit (Fig.
4
).
o
The green indicator light next to the switch is lit when the duct
filter unit is operating.
Fig.
4
