PAR.
DESCRIPTION
RANGE
APP1 APP2 APP3 APP4 M.U.
CA1 Calibration 1. Temperature value to be added to the Pb1 value
-12,0...+12,0 0,0
0,0
0,0
0,0
°C/°F
CA2 Calibration 2. Temperature value to be added to the Pb2 value
-12,0...+12,0 0,0
0,0
0,0
0,0
°C/°F
CA3 Calibration 3. Temperature value to be added to the Pb3 value
-12,0...+12,0 0,0
0,0
0,0
0,0
°C/°F
ddL Display mode during defrost.
0
= display the temperature recorded by Pb1;
1
= lock recorded value of Pb1 at defrost start;
2
= display the “dEF” label
0/1/2
0
0
0
0
num
Ldd Timeout value for display unlock - dEF label
0 ... 255
30
30
30
30
min
dro
Select the unit of measurement used when displaying the temperature recorded by the
probes. (
0
= °C,
1
= °F).
NOTE: switching between °C and °F or vice-versa DOES NOT modify the SEt,
diF values, etc. (e.g. Setpoint=10°C becomes 10°F)
0/1
0
0
0
0
flag
ddd Selects the type of value to display.
0
= Setpoint;
1
= probe Pb1;
2
= probe Pb2;
3
= probe Pb3.
0/1/2/3
1
1
1
1
num
HACCP (“HCP” folder)
SHH Maximum HACCP alarm signals threshold.
-55,0...150
0
10
0
0
°C/°F
SLH Minimum HACCP alarm signals threshold.
-55,0...150
0
-10
0
0
°C/°F
drA Minimum time spent in critical range for the event to be recorded. After this a HACCP
alarm will be triggered and logged.
0 ... 99
0
10
0
0
min
drH HACCP alarm reset time after last reset.
0 ... 250
0
24
0
0
hours
H50
Enable HACCP and alarm relay functions.
0
= HACCP alarms NOT enabled;
1
= HACCP alarms enabled and alarm relay NOT enabled;
2
= HACCP alarms enabled and alarm relay enabled.
0/1/2
0
1
0
0
num
H51 HACCP alarm exclusion time.
0 ... 250
0
0
0
0
min
CONFIGURATION (“CnF” folder)
H00 Probe type selection.
0
= PTC;
1
= NTC;
2
= PT1000.
0/1/2
1
1
1
1
num
H11
Configuration of digital input 1/polarity.
0
= disabled;
±1
= defrost;
±2
= economy Setpoint;
±3
= AUX;
±4
= door switch;
±5
= external alarm;
±6
= Standby;
±7
= pressure switch;
±8
= Deep Cooling;
±9
= disable HACCP alarm logging.
NOTE
: • the “+” sign indicates that the input is active if the contact is closed.
• the “-” sign indicates that the input is active if the contact is open.
-9 ... +9
2
0
4
2
num
