5
HOW TO USE
Before toasting, make sure
the Crumb Tray is in place
and that the Pop-up Lever is
in the up position. Check that
there is nothing in the
toaster slot. Plug power cord
into the wall outlet.
Set the toaster on a flat,
stable, heat resistant surface
away from any edge and well
away from any wall, curtain,
or cabinet.
When
finished
toasting,
unplug the toaster from
electrical outlet.
USE
EXTREME
CAUTION
WHEN
REMOVING
YOUR
ITEMS FROM THE TOASTER!
Whenever a preset function
button
is
set,
the
corresponding indicator light
will illuminate.
CANCEL button may be used
at any time to interrupt the
toasting cycle.
BROWNING CONTROL GUIDE
SETTING
TOAST
SHADE
1-2
LIGHT
3-5
MEDIUM
6-7
DARK
TOASTING:
1.
Insert the items into the
toast slot.
2.
Be sure that multiple slices do
not overlap and the lever is in
the up position.
3.
Select your desired toast
shade
by
setting
the
browning control.
4.
While your items are being
toasted, you can see the
cooking progress through the
viewing window.
5.
Push down the Pop-up Lever,
locking it into position.
6.
When finished, the items will
pop up from the toaster.
7.
Unplug the toaster when
done.
NOTE: When selecting the
Defrost, Reheat or Bagel
function, you must press the
toasting lever down before
selecting
one
of
these
settings.
BAGEL SETTING: Use to toast a
wide variety of different bagels
and is for single side toasting:
only the center (inner) heating
elements will function.
1.
Insert
bagels
into
the
toasting slots.
NOTE: Slice bagel into two
halves and place each half
into the toast slot. DO NOT
INSERT A WHOLE BAGEL
INTO THE TOAST SLOT.
2.
Select your desired toast
shade
by
setting
the
browning control.
3.
Push down the Pop-up Lever,
locking
the
bagel
into
position.
4.
Press the
“
BAGEL
”
button.
5.
When finished, the bagel will
pop up from the toaster.
6.
Unplug the toaster when
done.
REHEAT SETTING: Can reheat
bread, waffles, bagels, etc
…
without toasting the items.
1.
Insert items into the toasting
slot.
