8
1.
Simply wipe the exterior of
the toaster with a clean,
damp, soapy cloth. NOTE:
Do not apply any cleaning
agent
directly
onto
the
toaster.
2.
To remove any pieces of
bread stuck inside the toaster,
turn the toaster upside down
and shake gently. Never insert
any hard or sharp instrument
into the slots as this could
damage the toaster and cause
a safety hazard.
3.
Dry
all
parts
thoroughly
before
re-assembling
for
storage or for use.
4.
Never wrap the cord around
the sides of the toaster. Wrap
the cord around the storage
cleats found beneath the
toaster.
Crumb tray - Remove crumbs after each use.
The crumb tray should be emptied regularly as a build-up of crumbs could
be a potential fire hazard.
First, make sure the toaster is
completely shut-off, unplug it from
the electrical outlet, and allow it to
cool down thoroughly.
The crumb tray is located on the
bottom of the side
opposite of the control panel.
Slide out the crumb tray, discard the crumbs and wipe the tray clean
with a dry or damp cloth, and wipe the crumb trays clean. Always make
sure the crumb trays are completely dry before re-inserting them into
the toaster.
Cleaning the Removable Glass Panel
The centre front of the toaster has a full view glass window, which
lets you monitor the toasting progress. The inner panel of this
window is removable.
Hold the toaster with one hand
and lightly tilt it backwards. With
the other hand, press the latch at
the underside and gently pull out
the glass panel, as illustrated
below. Wipe the panel clean.
To reinsert the glass panel, lay the
toaster on its back, then hold the
panel by the latch and carefully
slide it back into the grooves at
the side until it clicks securely into
place.
Storage
•
Always let your toaster cool down completely prior to storing,
especially if it is stored in a tightly enclosed space.
Store the toaster with the cord wound up underneath the base.
