Elite PI-121, Руководство оператора

Страница: 122 / 390

PI-135 OPERATOR’S MANUAL
100
Standard View
There are two inherent “transition zones” each 100 feet
thick between the top/mid layers and the mid/bottom
layers respectively. These transition zones comprise the
last 50 feet of each layer (the lowest part of the higher
layer and the highest part of the lower layer). De pend ing
on the parameters set in each of the wind layers you may
experience some turbulence and changing conditions
when transitioning through these shear zones.
WIND DIRECTION
Wind direction is always MAGNETIC and can be
set in 10° in cre ments by click ing the UP and DOWN
ar row buttons. To make the wind di rec tion vari able
(with re spect to the se lect ed di rec tion) sim ply press
the +/- but ton. When set ting up dy nam ic (chang ing)
winds it is pos si ble to have the winds change in a clock wise
or counter clock wise man ner. The CW (clock wise) but ton
is a tog
gle switch that when de pressed will change to
CCW (counter clock wise). Sim ply leave this but ton up
(unselected) for clock wise ro ta tion of the chang ing winds
or down (se lect ed) for counter clock wise ro ta tion.
WIND SPEED
Wind speed in knots (0-60) is set by click ing the UP and
DOWN ar row but tons. To make the wind speed variable
sim ply press the +/- button.