Elite PI-121, Руководство оператора

Страница: 226 / 390

ELITE OPERATOR’S MANUAL
204
Flight Time Reset 3.
Use the SELECT button to select fl ight time (FT).
Hold the CONTROL button down for 3 seconds or
until 99:59 appears on the display. Flight time will
be zeroed upon release of the
CONTROL button.
Setting Flight Time Flashing Alarm 4.
Use the SELECT button to select fl ight time (FT).
Simultaneously press both the SELECT and
the CONTROL buttons by mouse clicking on the
SELECT & CONTROL button to enter the set mode.
The tens of hours digit will start fl ashing. The set
operation is the same as for UT. When actual fl ight
time equals the alarm time, the dis play will fl ash.
Pressing either the
SELECT or CONTROL button
will turn the fl ashing off and zero the alarm time.
Flight time is unchanged and continues counting.
Setting Elapsed Time Count Up 5.
Use the SELECT button to select elapsed time
(ET). Press the CONTROL button and elapsed
time will start counting. Elapsed time counts up to
59 minutes, 59 seconds, and then switches to hours
and minutes. It continues counting up to 99 hours
and 59 minutes. Pressing the
CONTROL button
again resets elapsed time to zero.