Elite GNS 430W, Инструкция по установке и краткое справочное руководство

Страница: 49 / 56

49 ELITE GNS 430W
Within 31 nautical miles of the destination •
airport, the CDI scaling will transition from
2.0nm ENR mode 1.0nm terminal or TERM
mode. In addition, when leaving a departure
airport, CDI scaling will transition from 1.0nm
to 2.0nm when 30 miles out. GPS-based
approaches will see a second transition when
within 2.0nm of the FAF scaling from 1.0nm
to full scale defl ection. (approach mode, or
“LNAV, LNAV+V, L/LNAV, OR LPV”)
A “RT to xxxº x S” or “LT to xxxº x S will appear •
in the lower right corner to alert whenyou are
at a safe distance to initiate the procedure
turn. the procedure turn is displayed on the
map page, however guidance through the
turn is not provided except through the roll
mode of steering-equipped autopilots.
Alerts for proper holding pattern entry such •
as “HOLD DIRECT” are displayed in the
lower right corner of the display. Waypoint
sequencing is automatically suspended
(indicated by “SUSP” in the lower left center
of the display) at the holding waypoint. Push
the OBS button again to return to automatic
waypoint sequencing. For course reversals,
waypoint sequencing is suspended for one
circuit around the holding pattern only, after
which it will return to automat waypoint
sequencing.
The CDI will guide you through a DME arc. •
You will need to keep the needle centered as
you fl y along the arc.
As you cross the MAP, “SUSP” will appear in •
the lower left center of the display indicating
that automatic sequencing of waypoints