Elite GNS 430W, Инструкция по установке и краткое справочное руководство

Страница: 10 / 56

SUPPLEMENTS
10
GENERAL OPERATION
POWER ON
To power on the ELITE GNS 430W module you
must fi rst load and run the ELITE® program.
Click on the appropriate ELITE® icon to start
the ELITE® program.
Once the program loads and the desired aircraft is selected
the aircraft master switch and avionics master switch (if
equipped) must be turned on.
Turn the COM Power/Volume knob clockwise to turn on
the unit power and set the desired transceiver volume.
A welcome page will appear briefl y while the unit performs
a self-test, followed by the display of several brief pages
relating to obstacle, terrain, airport data, etc. are self-tested
to ensure proper operation.
Once the unit’s self-test is completed, the Database
Confi rmation Page is displayed, showing the effective
and expiration dates of the navigation database. Note:
The database dates shown will NOT refl ect the current
Jeppesen Navigational Database cycle. Your current NOS
or Jeppesen charts may not refl ect the ELITE® database
within the simulator. Press the ENT key to acknowledge
the Database Page and proceed to the Instrument Panel
Self-test page.