Safety Warning
There is a potential risk of fire, electric shock or injury to persons if the product is not
used as instructed. Protection against electric shock is assured only if the main
power cord is connected to a properly grounded 120V | 60Hz power receptacle.
This product is to be used in an indoor environment only and is not intended for
commercial use. Dry locations only.
All parts and accessories for this appliance must be used properly according to the
instructions. All parts and accessories must be the original provided from
manufacturer. All other parts or accessories that is not intended for use with this
appliance is strictly prohibited.
The use of an extension cord, power adapter or other electric devices is highly not
recommended.
Additional Safety Tips
Always keep hands and face away from Pressure Release Device when releasing
pressure.
Use extreme caution when removing the lid after cooking. Always tilt the lid away
from you, so any remaining steam is away from your face.
Never attempt to open lid while cooking, or before float valve (4) has dropped. Do
not attempt to defeat this safety feature by forcing lid open.
Do not cover or block the pressure valves.
Do not touch the pot or lid except for the handle immediately after using.
To avoid burns, allow food to cool before tasting. The temperature of the food gets
considerably hotter than with conventional cooking.
LED Error Indicator
If any of the below error codes appear on the pressure cooker display, unplug the
power cord and re-plug after 10 minutes. If the error code remains, contact the
manufacturer for a replacement part.
See Troubleshooting on page 25 for instructions regarding an E4 error.
Indicator Code
Problems/Causes
E1
Open Circuit of the Sensor
E2
Short Circuit of the Sensor
E3
Overheating
E4
Signal Switch Malfunction
www.maxi-matic.com
4