Elite 4'3" wide compact, Инструкции и иллюстрации

Страница: 23 / 28

There are two pieces of flat bar approximately 125mm long that act as small door track
supports attached to the top door track either side of the door way. The end of the flat
bar with the larger hole bolts to the back of the top door track, the other end will line up
with the groove in the face of the corner bar where a small self tapping screw can be in-
serted to tighten the flat bar to give extra support.
FITTING THE RAMP
The final aluminium piece of the greenhouse is the door end ramp cill. The ramp is at-
tached to the door end cill by engaging the nub of the door end cill to the ‘C’ groove of
the ramp. The ramp is now rotated to horizontal. Drill a hole at each end approx. 20mm
in from the end of the ramp and into the floor. Plug and screw.
If you are fitting onto soft ground, you must ensure that a solid material is underneath
the ramp to avoid damage when you step on the ramp to enter the greenhouse. You can
lay a row of bricks sunk to ground level, a concrete flag, a piece of aluminium base
pressed into the ground to ground level or something similar. You can then screw the
ramp into the support material for a secure fixing.