051215-JA
4
www.elitescreens.com
B. Ceiling Mount
I. Flush Ceiling Mount
1. Determine where the screen will be installed. Then, measure and mark the distance between the (WxH) locations.
2. Drill a hole on all marked areas and insert a dry-wall anchor (C).
3. Secure the screen by inserting the M4x50 screw (B) and a washer (I) thru the wall/ceiling mount brackets (A).
Two or more people are required while one holds the screen in place.
II. Suspended
1. Screw the eyebolt (G) on the bracket connector (D).
2. Attach the snap link (J) thru the eyebolt (G) and connect it to an eyebolt screw (not included) rated for
the screen’s weight.
Screen material tension adjustment
(4mm Allen Wrench required and not included)
Remove the weight bar end cap to expose the adjustment tension knob. Insert your 4mm Allen Wrench to
push in the adjustment tension knob, turn clockwise and your screen will gain more tension. Turn the Allen
Wrench counter clockwise and the screen will lose tension. Please note this adjustment is not necessary as
the tension of the screen has been set to its factory setting for best performance. Please contact Elite Screens
for assistance to avoid damaging the screen and voiding your warranty at
H
W
Dry-wall
anchors (C)
M4x50 screw (B)
Ceiling
Push
Tension knob
Washer (I)
