051215-JA
3
www.elitescreens.com
Installation Instructions
For installation assistance, please consult a professional Installer. Elite Screens is not liable for faulty installations.
A. Wall Mount
I. Flush mount with wall/ceiling brackets (fixed position)
1. Begin by sliding the bracket connector (D) all the way to each end of the housing.
2. Then attach it to the wall/ceiling mount bracket (A) with the M5x15 bolt screw (E).
3. Measure and mark the (WxH) distance between the two holes on each bracket.
4. Drill a hole for each screw hole on the marked areas.
5. Insert a dry-wall anchor (C) into the wall.
6. Insert a M4x50 Screw (B) in each dry-wall anchor (C) and screw it in leaving about 1/8” of an inch.
7. Hang the screen by aligning the end cap holes to the M4x50 screws (B).
II. Flush hidden mount (movable position)
This mount method allows the screen to slide horizontally.
1. Determine where the screen will be installed. Then, measure and mark the distance between the top and bottom
screw holes from each hidden wall mount bracket (H).
2. Drill a hole on all marked areas and install the brackets with the dry-wall anchor (C), M4x50 screw (B), and a
washer (I). Make sure both brackets are properly leveled.
3. Hang the screen by placing the downward “catch “located on the back over the brackets upper “catch”.
4. After making sure the screen is secured, you can slide it left / right to properly center it in position.
5. Lastly, screw the M5 screw (F) into the upper hole of the bracket to add additional support for the screen.
W
H
Bracket connector
(D)
Wall/Ceiling Mount
Bracket (A)
M5x15 Bolt Screw
M4x50
screws (b)
Wall
Dry-wall
anchors (C)
H
W
Wall
Front view of bracket (h)
Side view of
bracket (h)
