Edge Frame Projection Screen
User’s Guide
Rev.10252019MZ
6
5.
Proceed to attach the rest of the material to the frame as described in the illustrations below.
6.
If the material is too loose or tight after adjusting all four corner sides, then you will need to reattach the
material.
Please follow the steps below to properly remove the screen material from the frame. This procedure
will ensure prolonging the life of the screen material.
Lay the Velcro end on the screen
material over the Velcro end of the
frame and keep it within the edge.
Proceed in the following sequence
below
①
②
The key is to attach within the
middle sections of 1 and 2. Then
continue attaching the remaining
unattached areas.
Repeat the same steps on
remaining three sides in the
sequence A, B, C, and then D as
show below.
Grasp the middle of the screen
material and attach it to the velcro
strip on the frame
Attach in the following sequence: a-b-c-d
B
A
C
D
