Edge Frame Projection Screen
User’s Guide
Rev.10252019MZ
12
120” comparison
Installation
Locate your desired installation location with a stud finder (recommended) and mark the drill-hole area of
where the screen is to be installed.
1.
Drill a hole with the proper bit size according to the wood screws included.
2.
Line up the wall brackets with the drilled holes on the installation location and screw them in using
a Phillips screwdriver.
3.
Position the frame screen onto the
wall brackets (F)
as shown in
below
.
4.
The design of the wall brackets allows the frame to slide over them through its sides. This is an
important feature of the installation design as it allows your screen to be properly centered.
For more information, support or your local Elite Screens contact,
please visit
Before installing the trim strip
After installing the trim strip
