MASTER AND SLAVE / NO TIMER
MASTER
1. Connect pin #2 of J2 Master to pin #2 of J2 Slave.
2. Connect pin #1 of J2 Master to pin #1 of J2 Slave.
3. Place both timer switches on “OFF” positions.
IN ORDER FOR THE FOLLOWING OPERATION TO OCCUR, FOLLOW THE INSTRUCTIONS.
EXAMPLE:
There is a double gate, the entry gate is to be opened with a radio transmitter and
the exit gate with a free exit loop. Only one safety loop system is to open both gates, and a
fire department switch should open both gates at the same time.
1. Connect the radio receiver to entry gate only.
2. Connect the exit loop to exit gate only.
3. Connect the safety loop to entry and exit gates.
4. Connect the fire department switch to entry and exit gates.
ON
OFF
TIMER
60 0
SLAVE
ON
OFF
TIMER
60 0
10 8 6 4 2
9 7 5 3 1
10 8 6 4 2
9 7 5 3 1
MASTER J2
SLAVE J2
PLACE 2 LOW VOLTAGE WIRES
BETWEEN OPERATORS
PARTIAL MASTER & INDIVIDUAL CONTROL
11
115 Volt
115 Volt
