OK
Configuring your Outlets
When you enter this setting you will first be asked
to switch on the shower. You will then be
prompted to confirm if the outlet running is the
desired Primary Outlet.
Next, move the lever left or right to browse icons.
Push the lever to select the icon that matches
your installation.
When you have selected the icons, your
choice will be confirmed with OK.
This setting enables you to choose the icons that
represent your outlets. If you have multiple outlets,
you can also select the most commonly used,
this is known as the primary outlet. Water will
divert to this outlet unless you select otherwise.
NB: Only available with divert models. You can not configure outlets whilst
the shower is in use.
Primary Outlet?
YES
NO
OK
Choose an icon
Confi gure Outlets
YES
NO
Cleaning tip: to keep your shower effortlessly clean, we recommend
drying all shower components with a soft cloth after use.
Caring for your Shower
Over time, your shower may be affected by hard water scaling. To keep
your shower working effectively, we recommend that you clean your shower
regularly.
Your product should be cleaned using only a soft cloth and washing up
liquid. The bath system ‘click clack’ waste plug mechanism (if applicable)
should be kept clear of debris to ensure the plug maintains a watertight
seal. The plug can be unscrewed and removed to check and clean the
mechanism.
Cleaning the shower head
To reduce the need for chemical descaling in hard water areas, your shower
head incorporates a ‘clear flow’ system, whereby any scale build-up can be
broken down by gently rubbing the flexible tips of the jets during use. This
procedure should be completed regularly, as often as once a week in some
hard water areas, as scale build-up can affect the spray pattern and cause
the shower to perform poorly. Failure to descale the shower head can affect
the internal seals and may affect the warranty. Should descaling of the
head using a cleaning agent become necessary, remove the shower head
fully and immerse in a mild proprietary descaler (e.g. vegetable based or
plain white vinegar). Cleaning and maintenance should not be undertaken
by children without supervision by a person responsible for their safety.
DO NOT USE ABRASIVE CLEANERS. It is imperative that descaling is
carried out in accordance with the manufacturer’s instructions,
substances that are not suitable for plastics and electroplated
surfaces must not be used.
Changing water system?
If switching from a gravity-fed water system to a mains pressure system (e.g.
Combination boiler) you will need to change your SmartValve. Contact a
member of our Customer Service team for further information.
14
15
Содержание intuition
Страница 1: ...User Guide intuition...
