Elimko E-PR-200 Series, Руководство пользователя

Страница: 40 / 56

Elimko
E-PR-200
KY-PR200-0420-0 PAGE
40/56
6.9. Custom Tables
Up to 10 custom linearization tables can be defined for linear channels. These tables define input and output
relations for non standart sensors.
Table Name:
10 character long table name.
Step Count:
Determines number of linearization steps. It can be maximum 20 steps.
X (%):
Determined percentage of the input values in the respective linearization step.
Y: X (%) d
etermines the value to be displayed in response.
Up-Down:
Both keys can be used to scroll between steps.
Figure 6.63 Custom Tables Page Figure 6.64 Analog Input page table selection
6.10. Archive
The configuration and archived data saved in the device's non-volatile memory can be easily synchronized to an
external flash memory by connecting a USB Flash Memory to the USB port of the recorder. Prior to the
synchronization, user should select the external memory device using
Directory Name
parameter. After selecting
the external memory device, synchronization is initiated by pressing
SYNCHRONIZE
button. While synchronizing,
user is strongly advised not to perform any operation. Synchronized data can be used for further data analysis in
Data Explorer Pro Software
. RESET ARCHIVE
button is used to delete all stored data archives. Resetting archive
causes all records to be lost irreversibly.
Sync. Direction: Sync. Direction
determines synchronization direction.
DEVICE TO DISC
option transfers
the data from device to external disc.
DISC TO DEVICE
does the reverse operation.
Directory Name:
Directory name selected directory located on the external disc. Synchronization reads
or writes the data to/from the directory
[Selected Directory]\E-PR-200-[Tag]\Archive
depending on synchronization direction.
Sync. Type:
Three different data transfer options are available for synchronization
COMPLETE
option transfers all data available for synchronization.
UP TO DATE
option transfer
only the new data which is saved after the last synchronization. From the date option
transfers data starting from the date which is set in
FROM A DATE
parameter.
Get From Old Format:
Get from old format button converts old format data saved by the versions older than
1.7.X to new format.
Backup: Backup device is selected by Directory Name parameter.
Backup Type:
Two options with different capabilities and functions are available for Backup Type.
User has the chance of either periodic data synchronization or memory extension by
selecting
COMPLETE BACKUP
or
MEMORY EXTENSION
respectively.
Backup Period:
Determines backup period when Backup Type is set to
COMPLETE BACKUP.
Selectable
periods are
every day
,
every week
and
every month.