Eliminator Lighting Decor XV, Руководство пользователя

Страница: 7 / 18

7
S A F E T Y G U I D E L I N E S
DO NOT
position devices close to any
FLAMMABLE MATERIALS
while operating.
DO NOT attempt installation and/or operation of devices without knowledge of how to do so.
DO NOT
permit operation by persons who are not qualified to operate these types of devices.
DO NOT shake devices, avoid brute force when installing and/or operating.
DO NOT
operate these devices if the main power cord has become frayed, crimped and/or damaged.
Replace any damaged power cords with cords of a similar power rating.
DO NOT
remove or break off the ground plug from the device power cords.
DO NOT
remove or disassemble devices, there are NO user serviceable parts inside.
ALWAYS disconnect devices from main power source before performing any cleaning.
ALWAYS disconnect light from main power source before replacing lights.
ALWAYS be sure to install these devices in an area that will allow proper ventilation.
NEVER remove the ground prong from the power cable.
Power cords should be safely routed and secured so they are not likely to get pinched.
Disconnect power cords during long periods of non-use.
Use the original packaging and materials to transport these devices for service.
These devices should be serviced by qualified service personnel when:
•
The power cords or plugs have become damaged.
• Objects have fallen on and/or liquid has spilled into the devices.
•
The devices have been exposed to rain and/or moisture.
•
The devices do not operate normally or exhibit a marked change in performance.