13
W I R E L E S S R E M O T E F U N C T I O N S
[S] [S+] BUTTONS
These buttons can be used to control the program speed of the selected Dynamic Mode program.
Each press of either of these buttons will decrease or increase the program speed.
[GROUPING-ZONES 1-4] BUTTONS
These ON/OFF buttons allow you to control (4) independent Groups/Zones.
ASSIGNING GROUPING ZONES
You can assign up to (4) individual Groups/Zones to the included remote control.
Groups/Zones can consist of one or more illuminated letters.
INDIVIDUAL GROUPING ZONES
1.
Disconnect the illuminated letter(s) from power.
2.
Reconnect the illuminated letter(s) to power. Within 3 seconds, press and hold the
[ | ]
portion of the
desired Grouping Zone Button.
3.
The illuminated letter(s) will pulse 3 times to indicate that it has been successfully assigned to the
grouping zone, or it will pulse 8 times to indicate that it has been successfully removed from the grouping
zone.
DELETE ALL GROUPING ZONES
1.
Disconnect all illuminated letters that are being controlled by the remote from power.
2.
Reconnect the illuminated letters to power. Within 3 seconds, press and hold the
[ - ] ON BUTTON
at
the top of the remote. The letters will pulse 8 times to indicate that control from all grouping zones on
the remote has been removed.
NOTE: DUE TO THE SHORT TIME FRAME PERMITTED TO PRESS THE [ - ] ON BUTTON AFTER
POWER HAS BEEN RECONNECTED, IT IS ADVISABLE TO PLUG THE ILLUMINATED LETTERS
INTO A SINGLE SWITCHABLE POWER SOURCE FOR EASE OF CONNECTING AND
DISCONNECTING POWER WHILE SETTING THE GROUPING ZONES.
Содержание Decor XV
Страница 1: ...Decor XV User Guide...
Страница 18: ......