33
English
• Undo the star screw (1) so that the feed hopper can be moved.
The anti-projection flap can now be tilted and the leaf litter can
move more easily through the feed hopper.
Warning:
If the anti-projection flap is opened, particular attention must be paid to the
recoil of cuttings along the feed hopper. Always wear the appropriate protective
equipment.
• In the case of branches, it is recommended to feed in the thickest part of the branch first.
• Never use a step for feeding the loading hopper with garden waste.
• Never put your hands further in than the base of the anti-projection cover.
• Never push jammed green waste into the hopper with your foot.
Warning:
Do not lean forwards to push material further into the loading hopper
so that your hands NEVER go past the safety screen.
• By reducing the amount of material that you feed into the machine, it will operate more opti-
mally.
• In the case of branches, it is recommended to feed in the thickest part of the branch first.
Caution:
Thick branches that have been sawn at both ends must be fed in from the left
hand side of the hopper so that they are guided by the wall. Make sure that
branches do not turn diagonally to the supply direction as this can block the
machine.
