Eliet DZC750, Руководство пользователя

Страница: 72 / 106

72
English
• NOVATIO PTFE OIL, is a very thin oil that will easily penetrate the links.
• NOVATIO CLEARLUBE, a more viscous oil, will cling to the outside of the chain. This lubricant
diminishes the friction between the chain and the gears.
• When replacing the protective cover, ensure proper closure to keep the inside free from dust.
11.4.2.5 Friction surfaces
Friction surfaces are all machine parts subject to wear from lateral friction with other parts.
Here, too, the message is to apply a film of lubricant between the rubbing parts that will reduce
movement resistance and minimise wear. These surfaces include:
1) Wire rods for depth setting
2) Wire rod for flow rate adjustment on the seed
reservoir
3) Ball joints on the hydrostat and the guiding
axes
4) Chain tensioner guide (blade axis - discharge
jack)
5) Chain tensioner guide (gear box - discharge
jack)
6) Cable guide for All-in-one
TM
control lever
(AIOC)
7) Cable guide from AIOC lever to clamp on
cruise control
8) Guide fork at the end of the cruise control
rods
• Proper functioning of the control levers is crucial and regular lubrication of the cables is
therefore of vital importance.
• In particular during dryer periods, operating the machine will produce a lot of dust that settles
everywhere, including on the cables.
• Prior to lubricating, the cables must be cleaned. KLEENSPRAY is again an ideal tool.
• Also spray it into the cable guide and simultaneously move the cable back and forth to ensure
that the cleaner penetrates the guide.
• Use compressed air to clean the cable guide of both cleaner and dirt.
• Repeat this procedure until the guides are completely clean.