Eliet C550 ZR, Руководство пользователя

Страница: 20 / 64

20
English
8.2. Positioning the handlebar
• Loosen the fastening parts on each side of the handlebar support. To do this, turn the screw
button (anti-clockwise) completely out of the hinging axis.
• Now place the left-hand handlebar end in the inner cavity of the handlebar support. For this,
press the handlebar tube into the opening between the two springs.
• Now place the cable guides on the inside of the handlebar support.
• Then push the right-hand handlebar end inwards in the direction of the other handlebar end.
The tube will bend a little elastically so that it can be placed in the inner cavity of the second
handlebar support.
Caution: In doing so, make sure that the cable guides are not pinched between
the handlebar tube and the handlebar support.
• Again, the handlebar tube must be placed in the space between the two compression springs.
• Apply some NOVATIO CLEAR LUBE-S lubricant to the hinging axis and place it in the hinges at
the end of each handlebar tube.
• Make sure that the rectangular protrusion at the end of the hinge is placed in the slot of the
handlebar support.
• Place the screw button in the hinging axis (turn clockwise). Make sure that the correct order
of spacings is respected (see drawing: a. screw button, b. safety pinion, c. steel pinion, d. nylon
pinion)
• Select the desired steering height and tighten the screw buttons firmly.
a
c
d
c
b