Eliet C550 ZR, Руководство пользователя

Страница: 53 / 64

53
English
12. Storing the machine
Clean the machine (read § 9.8.1; page 30)
When storing the machine for an extended period, it is recommended to follow the steps below:
• Perform comprehensive maintenance(read § 11.5; page 45)
• Check all nuts and bolts and tighten them where necessary. Most bolts require the use of two
spanners, size 10, 13 or 17.
• Empty all fuel from the tank. This can be done simply by letting the engine run until the ma-
chine hits empty. Use a siphon if necessary, to pump the petrol into a jerrycan (read § 9.3; page
23)
• Remove the spark plug. (read § 11.5.2; page 45) Spray some MoS2-based penetrating oil into
the cylinder. Pull the starter cord until the piston is in its uppermost position. Replace the spark
plug.
• To avoid rust on the machine, touch up all chipped areas or treat them with anti-rust grease.
Original paints/enamels in the appropriate colours are available from your ELIET dealer.
• Store the machine in a cool, dry place, away from possible rain. If necessary, cover it with a
tarpaulin.
• Always allow the machine to cool down before storage.
• If the machine is stored outdoors, it must be properly covered with a tarpaulin. Avoid rain/water
from splashing on the machine. ELIET highly recommends a sheltered storage place.