Eliet C550 ZR, Руководство пользователя

Страница: 13 / 64

13
English
• The final pictogram instructs the operator to read the manual
before using the machine, to avoid any incorrect handling which
could be dangerous for themselves and for and others.
(BQ 505 010 550)
4.
On the side of the large protective cover at the bottom edge,
there is also a pictogram indicating the hazards in this specific
area.
• On the underside of the large protective cover, the operator is
close to blades, whether running or not. There is a serious risk
of injury to the feet if they come into contact with the blades. As
such, be careful with your feet, wear suitable footwear and do not
get under the edge of the machine.
(BQ 501 480 020)
5.
A sticker on the discharge side of the deflector cover also indica-
tes a number of hazards in this zone:
• This pictogram indicates an acute hazard. Special attention is
required.
• A jack rotates in the discharge zone, discharging the raked product
next to the machine and collecting it in a verge. The jack rotates
near to the discharge zone. In the event of contact with the hands,
there is a risk of hands getting caught and slicing injuries may
result. Keep hands away from this zone.
• On the discharge side, material is of course discharged from
the machine. It is therefore important to indicate the projectile
hazards in this zone. Keep a safe distance.
• The pictogram indicates a risk of slicing the feet. The discharge
zone contains a rotating jack and the blades are also located in
this area. Contact with the feet may result in slicing injuries. Keep
feet at a safe distance.
• There are 2 pictograms at the rear of the machine indicating two
attachment points where the machine can be securely fixed for
transport.
• There is a sticker on the right hand side of the handlebar indica-
ting the weighted noise level of the machine. This provides the
operator with information about the exposure to noise, and the
appropriate hearing protection to be envisaged.
(BQ 505 010 540)
Caution: If due to cleaning or use, safety stickers or parts displaying safety
information have been damaged, removed or become illegible, they must be
replaced immediately. Stickers and parts can be obtained from your official
ELIET dealer.