
Installation
- 24 -
8
Installation
CAUTION
Please read the operating manual carefully before using the device! Strictly observe the Instal-
lation instructions!
In case of damage caused by failure to observe this operating manual, the warranty expires.
ELGO is not liable for any secondary damage and for damage to persons, property or assets.
The operator is obliged to take appropriate safety measures. The first start-up may only be
performed by staff that has been trained and authorized by the operator.
CAUTION!
The
LIMAX SG/SC
device consists of 2 separate components, the position sensor and the Safe
Box.
It has to be ensured, that the installed components are compliant with the components
named in the declaration of conformity.
Therefore:
The register numbers of the certificate which are quoted in the declaration of conformity have
to be compared with certificate numbers printed on the type labels of sensor and safe box
before installation.
8.1
Operating Area
WARNING!
Do not use the device in explosive or corrosive environments!
The device must not be installed close to sources of strong inductive or capacitive interference
or strong electrostatic fields!
CAUTION!
The electrical connections must be made by suitably qualified personnel in accordance with
local regulations.
The device may be designed for switchboard mounting. During work on the switchboard, all
components must be de-energized if there is a danger of touching the energized parts!
(protection against contacts)
Wiring works may only be performed in the de-energized state!
Thin cable strands have to be equipped with end sleeves!
Before switching on the device, connections and plug connectors have to be checked!
The device must be mounted in a way that it is protected against harmful environmental influ-
ences such as splashing water, solvents, vibration, shock and severe pollution and the operat-
ing temperature must not be exceeded.