8
Configuration Register
Pressing the above buttonfor three seconds gives access to the configuration 5 digit register.
F
0 -
1 -
2 - Edit datum + or - 1 bit.
Datum / Datum Offset Edit
0 - Unlocked
1 - locked
Multiplier edit
0 - Unlocked
1 - Locked
Datum offset recalled on power up
0 - No
1 - Yes
0 - Differential counting.
1 - Encoder X 1
2 - Encoder X 2
3 - Encoder X 4
Set datum to stored value
Set as required
X
X
X
X
X
Series 54 / Encoder feedback only
Series 56 / Scale feedback only
Display extinguish
0 - No auto extinguish and no clamp extinguish
1 - Total power off / on with F button.
2 - Total power off after 5 minutes of inactivity.
3 - Extinguish display only, with clamp input
4 - Extinguish display only, after 10 seconds of inactivity
OR
X
Ignore 6th digit
if present
Datum Mode
5 - Extinguish display only, after 30 seconds of inactivity
6 - Extinguish display only, after 1minute of inactivity
7 - Extinguish display only, after 2 minutes of inactivity
*
Only available in 3v version
.
Only with LED display
.
*
*
*
*
*
*
