Elgar CW 1251M, Руководство по эксплуатации

Страница: 35 / 48

Elgar CW-M Series
4 SET-UP
Once installation is complete and all cable connections are secure, check the settings
on the 12-position CONFIG dipswitch located on the rear panel. Refer to Figure 4–1.
Configure the switch prior to applying unit power.
Figure 4–1 CW Rear Panel
4.1 CONFIG Dipswitch
The CONFIG dipswitch comes preset from the factory for stand-alone operation.
With these settings, the unit powers up to the current voltage and operates in
constant current mode. The dipswitch settings should look like this:
1 2 3 4 5 6 7 8 9 10 11 12
ON
OFF
The functions of the CONFIG dipswitch are listed in Table 4–1, followed by descriptions
of switch positions to change the default attributes of the unit.
25